| FlexiGlow UV Laser LED Kit |
 |
| |
| Today we review the
FlexiGlow UV Laser LED Kit. We would like to
thank
Directron for supplying the sample for review. |
| |
| The FlexiGlow UV Laser LED Kit is an
enthusiast component designed to allow modders to add UV
lighting to their case. |
| It consists of 3 UV LEDs, a switch,
and a Velcro mounted control box. |
| |
| According to the back, FlexiGlow also
sells a sonic driver and a car adapter. |
 |
| |
| The UV LED kit is well packaged.
Here we can see its components. The Packaging is
easily opened and is not the difficult bubble packaging. |
 |
| |
| Once out of its package the LED
kit is a huge mass of wires. Each LED is on a
separate wire, as is the control switch. This
allows the LEDs to be placed in most any location in a
case. |
 |
| |
| Each LED has double sided tape stuck
to the bottom of its base. Just peel off the
protecting paper and place it where one wants. |
| The LEDs are also adjustable in a 90
degree arc for fine positioning |
| Once mounted they are stuck, so it is
not recommended to move them around after sticking them
on. |
 |
| |
| Included in the package is a 3 way
switch. The FlexiGlow LED Kit has 3 settings: On,
Off, and Flash. |
| The Flashing is at about one second
intervals, though we prefer the constant on state. |
| The switch is a nice feature and can
be added to ones case with some modification. We
were able to place it into a slot on our cases
FrontX panel. |
 |
| |
| The control box can be placed
internally in a case and is mounted with Velcro. A
sticky backed Velcro base is included. |
| |
|
Next Page
-> |
| |
|
Page 1 Introduction |
|
Page 2 Internal Shots |
|
Page 3 Conclusion |
| |
| |
 |
| |
