| FlexiGlow UV Laser LED Kit Mounted |
|
|
| Mounting the kit into our Acrylic
case was quite easy. We first sleeved the wires of
the 2 front LEDs in 1/8th" Spiral wrap. |
| The 3 way switch was mounted in our
FrontX Panel by removing one of the FrontX USB ports and
replacing it with the FlexiGlow LED Switch. |
 |
| |
| We initially taped the LEDs in and
set up the wiring. |
 |
| |
| Then we removed the paper from the
sticky tape at the bottom of the LEDs and mounted them
permanently to our Acrylic blocks. |
 |
| |
| Here is what it looks like with the
lights off. |
 |
 |
 |
| |
|
Next Page
-> |
| |
|
Page 1 Introduction |
|
Page 2 Internal Shots |
|
Page 3 Conclusion |
| |
| |
 |
| |
